![MATRICE 350 RTK + L2 SENSOR](http://www.maverickdrone.com/cdn/shop/files/4klqd4e_1635873731_l6pdaa5.png?v=1717620927&width=1080)
MATRICE 350 RTK + L2 SENSOR
Supplier: Maverick
- In stock, ready to ship
- Backordered, shipping soon
The Matrice 350 RTK takes inspiration from modern aviation systems. Offering up to 55 minutes of flight time, advanced AI capabilities, 6 Directional Sensing & Positioning, and more, the M350 RTK sets a whole new standard by combining intelligence with high-performance and unrivaled reliability. Zenmuse L2 integrates frame LiDAR, a self-developed high-accuracy IMU system, and a 4/3 CMOS RGB mapping camera, providing DJI flight platforms with more precise, efficient, and reliable geospatial data acquisition. When used with DJI Terra, it delivers a turnkey solution for 3D data collection and high-accuracy post-processing.
NOTE: To prepare the lidar data and create a LAS file, you need a GNSS base station. It is recommended, for easiest processing, to use the DJI D-RTK 2 Base Station. You can, however, use a CORS station or your own GNSS base station. You will need to download and install DJI Terra to prepare the LAS file (point cloud). You can download Terra here: https://www.dji.com/downloads/products/dji-terra
IN THE BOX:
1 x Matrice 350 Aircraft Body
1 x DJI RC Plus Controller
1 x USB Charger (wall adapter)
1 x USB A - USB A Cable
1 x USB C - USB A Cable
1 x USB C - USB C Cable
2 x TB65 batteries
1 x WB37 Intelligent Battery
2 x 2110 Propeller (CW)
2 x 2110 Propeller (CCW)
2 x Landing Gear
1 x Carrying Case
1 x Manual
1 x L2 Sensor
The Matrice 350 RTK takes inspiration from modern aviation systems. Offering up to 55 minutes of flight time, advanced AI capabilities, 6 Directional Sensing & Positioning, and more, the M350 RTK sets a whole new standard by combining intelligence with high-performance and unrivaled reliability. Zenmuse L2 integrates frame LiDAR, a self-developed high-accuracy IMU system, and a 4/3 CMOS RGB mapping camera, providing DJI flight platforms with more precise, efficient, and reliable geospatial data acquisition. When used with DJI Terra, it delivers a turnkey solution for 3D data collection and high-accuracy post-processing.
NOTE: To prepare the lidar data and create a LAS file, you need a GNSS base station. It is recommended, for easiest processing, to use the DJI D-RTK 2 Base Station. You can, however, use a CORS station or your own GNSS base station. You will need to download and install DJI Terra to prepare the LAS file (point cloud). You can download Terra here: https://www.dji.com/downloads/products/dji-terra
IN THE BOX:
1 x Matrice 350 Aircraft Body
1 x DJI RC Plus Controller
1 x USB Charger (wall adapter)
1 x USB A - USB A Cable
1 x USB C - USB A Cable
1 x USB C - USB C Cable
2 x TB65 batteries
1 x WB37 Intelligent Battery
2 x 2110 Propeller (CW)
2 x 2110 Propeller (CCW)
2 x Landing Gear
1 x Carrying Case
1 x Manual
1 x L2 Sensor